Electrical equipment and devices Mitsubishi Galant 5

Chassis electrical equipment — general description
The 12V electrical system has a negative common wire. Power for the lamps and all electrical components is supplied by a lead-acid battery, which in turn is charged by...

Electrical Equipment Fault Diagnosis — General Description
A typical electrical circuit consists of an electrical component, several switches, actuator relays, fuses, fuses, or circuit breakers associated with the unit, and...

Fuses — General Description
The vehicle's electrical circuits are protected by a combination of fuses, circuit breakers, and fuse links. The fuse boxes are located under the instrument panel on the...

Fusible Links — General Description
Some targets are protected by fusible links. Links are used in circuits that do not have conventional fuses, such as the ignition circuit. The fuse links on these models...

Relay — General Description
Some electrical components use a relay to supply electrical current. If the relay is faulty, the component will not work properly. Several relays are grouped together in...

Direction Indicator/Hazard Warning Flashers — Checking and Replacing
1. The turn signal/hazard warning flashers, which are small box-shaped devices located under the instrument cluster (see illustration), cause the turn signals to flash....

Ignition Switch — Removal and Installation
1. Disconnect the negative battery cable. 2. Remove the steering column cover (see illustration). 7.2 Typical parts of ignition switch and combination switch. 1....

Combination switch — removal and installation
1. Disconnect the negative battery cable. 2. Remove the steering wheel ( Chapter 10 ). 3. Remove the lower trim panel and steering column cover. 4. Unscrew the fixing...

Headlights — Removal and Installation
1. Disconnect the negative battery cable. Non-detachable headlight bulb 2. On some models it may be necessary to remove the radiator grille. 3. Loosen the screws and...

Headlights — adjustment
Note: It is important that the headlights are adjusted correctly. Incorrectly adjusted headlights can blind oncoming drivers, cause a serious accident, or reduce...

Replacing lamps
1. Many lamps have diffusers that are secured with screws, making it easy to access the lamps. 2. On some lamps, the diffusers are attached using clamps. In this case,...

Instrument cluster — removal and installation
1. Disconnect the negative battery cable. 2. Remove the steering wheel ( see Chapter 10 ). 3. Remove the steering column cover, sleeve and other components that prevent...

Cruise control system — description and testing
The cruise control system maintains the vehicle's speed using a vacuum servo located in the engine compartment and connected to the throttle linkage via a cable. The...

Electric windows — description and testing
Electric window lifters, controlled by electric drives mounted in the doors, are designed to raise and lower the glass. The system consists of control switches, drives...

Central locking — description and testing
The central locking system controls the drives mounted in each door. The system consists of switches, drives and wires. Diagnostics of system faults requires special...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Similar materials for other Mitsubishi models

➤ Electrical equipment: Equipment and devices Mitsubishi Colt 2 and 3 (1983-1993)
➤ Electrical equipment: Equipment and devices Mitsubishi Lancer 3 and 5 (1984-1992)
➤ Electrical equipment: Equipment and devices Mitsubishi L200 4 (2005-2014, diesel)
➤ General information: Salon equipment Mitsubishi Outlander 1 (2003-2008)
➤ General information: Instruments and controls Mitsubishi Pajero 1 and 2 (1982-1999)
➤ Electrical equipment: Equipment and devices Mitsubishi Space Star (1998-2005)

Share with friends:

Link in different formats to this section

TEXTHTMLBB Code