Vehicle fuel system Mitsubishi L200 4

Fuel supply system — design description
The fuel supply system consists of the following main components: fuel injectors; high pressure fuel pump; high pressure fuel manifold; fuel tank; fuel filter. General...

Removal and installation the fuel tank
Removal sequence 1. Filler cap; 2. Filler neck pipe; 3. Air outlet (or inlet) tube; 4. Overflow tube; 5. Filler neck; 6. Fastening the filler neck to the body; 7....

Disassembly and assembly of the fuel tank measuring and receiving unit
Disassembly sequence 1. Fuel filter; 2. Level sensor; 3. Connector; 4. Sealing ring; 5. Flange with fuel pipes

Removal and installation of fuel supply system components
Fuel filter removal sequence for Tier 3 emission control vehicles (see Fig. M2 2.179) 1. Water level sensor connector. 2. Fuel line B. 3. Fuel line C. 5. Return fuel...

Replacing the fuel filter element
Fix the filter housing in a vice and unscrew the cover using a special key. When installing the filter element, tighten the filter cap by hand until it touches the...

Glow plugs
Before starting the engine, when the ignition is turned on, supply voltage is supplied to the glow plugs. The duration of the preheating depends on the coolant...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Similar materials for other Mitsubishi models

➤ Power unit: Power and exhaust system Mitsubishi Colt 2 and 3 (1983-1993)
➤ Power unit: Diesel power system Mitsubishi Lancer 3 and 5 (1984-1992)
➤ Power unit: Power and exhaust systems Mitsubishi Galant 6 and 7 (1987-1998)
➤ Power unit: Fuel system Mitsubishi Pajero 4 (2006-2021)
➤ Power unit: Diesel supply system F9Q1 Mitsubishi Space Star (1998-2005)

Share with friends:

Link in different formats to this section

TEXTHTMLBB Code