Car clutch repair Mitsubishi L200 4

Clutch specifications
Clutch specifications Clutch release drive type Hydraulic with remote (non-coaxial) working cylinder Clutch mechanism type Dry single disc Friction lining outer diameter...

Clutch specifications
Clutch specifications Characteristic Meaning Clutch Pedal Height (LHD) 183.5-186.5 mm Clutch Pedal Height (RHD) 178.5-181.5 mm Free travel of the clutch pedal (from the...

Removal and installation the clutch release drive
Master cylinder removal sequence: 1. Cotter pin; 2. Finger; 3. Connecting hydraulic pipes; 4. Master cylinder assembly; 5. Gasket Sequence of removal of the clutch slave...

Disassembly and assembly of the clutch master cylinder
Caution: Do not disassemble the Piston assembly. Disassembly sequence: 1. Piston retaining ring; 2. Rod assembly; 3. Piston assembly; 4. Expansion tank cap; 5. Tubular...

Installing the master cylinder rod
To facilitate adjustment of the clutch pedal position during assembly, check the dimension A 120.4-122.4 mm (see Fig. M2 4.018).

Disassembly and assembly of the clutch mechanism (coupling)
Control data Parameter Limit value Height difference between diaphragm spring petals 0.5 mm Minimum recess of the rivet for fastening the driven disc linings 0.3 mm...

Removal and installation the clutch release fork
Removal To remove the fork, pull it out in the direction of the arrow as shown in Fig. M2 4.020. Installation Installation is carried out in the reverse order. Before...

Installing the release bearing
Before installation, apply consistent grease to the areas indicated in Fig. M2 4.021. Install the heel pad onto the guide. Install the fork. Secure the bearing with...

Installing the clutch release mechanism
Before installation, apply grease to the spline hole as shown in Fig. M2 4.022. Before installing the clutch housing, center the driven disc using a guide. Install the...

Clutch slave cylinder disassembly procedure
1. Rod; 2. Anther; 3. Piston cuff B; 4. Piston; 5. Piston cuff A; 6. Conical spring; 7. Protective cap of the bleed valve; 8. Bleed valve; 9. Cylinder body Brake fluid:...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Similar materials for other Mitsubishi models

➤ Transmission: Clutch Mitsubishi Colt 4 and 5 (1991-2003)
➤ Transmission: Clutch Mitsubishi Lancer 3 and 5 (1984-1992)
➤ Transmission: Clutch and drive shafts Mitsubishi Galant 5 (1983-1989, petrol)
➤ Transmission: Clutch Mitsubishi Outlander 1 (2003-2008)
➤ Transmission: Clutch Mitsubishi Pajero 1 and 2 (1982-1999)
➤ Transmission: Clutch Mitsubishi Space Star (1998-2005)

Share with friends:

Link in different formats to this section

TEXTHTMLBB Code