Clutch adjustment All cars in question after 1989 are equipped with a hydraulic clutch. Procedure for adjusting the height and free play of the clutch pedal (see subsection 9.1.2 )....
Clutch release cable parts Details of the clutch and release mechanism (cable drive) 1. Gearbox; 2. Cover of a conducted disk; 3. Friction disc; 4. Spring clip; 5. Release bearing; 6. Spring...
Hydraulic clutch Details of the clutch and release mechanism (hydraulic drive) 1. Gearbox; 2. Cover of a conducted disk; 3. Friction disc; 4. Fork spring; 5. Release bearing; 6. Working...
Removal and installation of clutch Mandrel clutch installation 1. Flywheel; 2. Friction disc; 3. Lubricate; 4. Mandrel; 5. Casing 1. Remove the gearbox. 2. Install the centering mandrel (e.g. old gearbox...
Clutch master cylinder — removal and installation Clutch master cylinder parts 1. Retaining ring; 2. Rod and damper; 3. Piston assembly; 4. Cork; 5. Tank; 6. Collar; 7. Cylinder Removal and installation 1. Unscrew...
Clutch release slave cylinder — removal and installation Removal and installation 1. Raise the vehicle. 2. Loosen the bleed screw and drain the fluid into a container. 3. Disconnect the hose union, turn off 2 bolts and remove...
Removal of air from the hydraulic clutch 1. Fill the reservoir with fresh brake fluid (the use of waste fluid is prohibited). 2. Turn off the pumping union on the working cylinder, attach a transparent hose to...