Car clutch repair Mitsubishi Colt 4 and 5

Clutch design and operation
Hydraulic clutch drive elements 1 - clutch master cylinder; 2, 4 - hydraulic tube; 3 - hose; 5 - clutch slave cylinder. The transmission of force between the engine and...

Checking the clutch
It is impossible to detect wear of the driven disk in the installed state; the first indication of this is slippage of the clutch. A slipping clutch is noticeable when...

Driving with a faulty clutch drive
Turning off the transmission Release the gas and, at low speed or when the vehicle is braking slightly, push the gear shift lever toward neutral. Moving off Turn off the...

Clutch — removal and installation
Remove the gearbox. Mark the position of the drive disc on the engine flywheel. By inserting a screwdriver or metal rod into the teeth of the ring gear, lock the engine...

Checking the clutch elements
Check the clutch pressure plate for damage and warping. If damage is found, replace the pressure plate. Check the clutch disc friction linings for wear and loose rivets,...

Release bearing — removal and installation
Removal Remove the gearbox. Press down the retaining spring and remove the release bearing. Examination Squeeze and turn the release bearing at the same time. If the...

Clutch pedal free play — checking and adjusting
Clutch pedal mounting elements 1 - clutch pedal; 2 - bushing; 3 - bracket; 4 - adjusting bolt or clutch release sensor; 5 - spring; 6 - pin; 7 - emphasis; 8 - tube; 9 -...

Bleeding the Clutch System
Air must be removed from the clutch system when disconnecting hydraulic lines or when removing system parts. Removing air from the system is carried out as follows:...

Clutch Master Cylinder for Petrol Engine Models — Removal and Installation
Elements of the master cylinder of models with gasoline engines 1 - lid; 2 - tank; 3 - clamp; 4 - body; 5 - piston assembly; 6 - retaining ring; 7 - pusher. Removal...

Clutch Master Cylinder for Diesel Engine Models — Removal and Installation
Master Cylinder Components for Diesel Engine Models (Late Models) 1 - nipple; 2 - body; 3 - piston assembly; 4 - retaining ring; 5 - pusher assembly. Removal Remove the...

Clutch slave cylinder — removal and installation
Clutch slave cylinder mounting elements 1 - hydraulic drive tube; 2 - body; 3 - bleed screw; 4 - dust cover; 5 - thrust. Clutch slave cylinder components 1 - nipple; 2 -...

Diagnosing Clutch Faults
Diagnosing Clutch Faults

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Similar materials for other Mitsubishi models

➤ Transmission: Clutch Mitsubishi Lancer 3 and 5 (1984-1992)
➤ Transmission: Clutch and drive shafts Mitsubishi Galant 5 (1983-1989, petrol)
➤ Transmission: Clutch Mitsubishi L200 4 (2005-2014, diesel)
➤ Transmission: Clutch Mitsubishi Outlander 1 (2003-2008)
➤ Transmission: Clutch Mitsubishi Pajero 1 and 2 (1982-1999)
➤ Transmission: Clutch Mitsubishi Space Star (1998-2005)

Share with friends:

Link in different formats to this section

TEXTHTMLBB Code