General description of steering Elements of the steering system 1 - steering gear reducer; 2 - power steering pump; 3 - tank; 4 - steering column; 3 - steering wheel; 6 - steering column tilt lever...
Steering wheel — removal and installation ATTENTION: Removal of the steering wheel on models equipped with an airbag must be carried out in specialized workshops. Removing Set the wheels straight. Disconnect the...
Checking anthers and tie rod ends The tie rod ends at the outer ends of the tie rods consist of steel ball heads which are contained in a plastic bushing with little lubrication and require no...
Tie rod end — removal and installation Removing Slightly loosen the wheel nuts of both front wheels on the ground. Mark the position of the rim on the wheel hub with paint. Place the front of the car on jack...
Check of tightness of system of a steering If there is no liquid in the compensation tank, the steering system must be checked for leaks. Start the engine, leaving it to idle. Build up maximum pressure in the...
Removing air from the steering system If lines are disconnected or new fluid is added to the system, air must be bled from the steering system. When changing the fluid, clean the filter with clean gasoline....
Changing fluid in the steering system Raise the front wheels of the vehicle and place the vehicle on stands. Disconnect outlet hose (1). Connect the hose (2) to the outlet hose and drain the working fluid...
Steering gear — removal and installation Steering gear fittings 1 - tie rod ends; 2 - bracket for fastening the steering rack; 3 - bracket for fastening the steering gear housing; 4 - steering mechanism; 5 -...
Ore Mechanism — Repair Disassembly Remove the protective covers from the rack housing. Check crank torque with a torque wrench (1), rotate the rack and pinion steering gear within one...