General description of automatic transmission The vehicles are equipped with an automatic transmission with four forward gears and one reverse. One of the most common automatic transmissions are the F4A series boxes...
Fluid level in the gearbox — check Warm up the engine • Park the vehicle on a level surface. Sequentially move the shift lever to each position. This will ensure that the torque converter and hydraulic...
Torque converter lock-up — check The blocking test consists in determining the critical (maximum) engine speed at full throttle and shift lever positions «D» And «R». This test checks the operation of...
Gear shift levers — check operation Move the shift lever to each position and make sure the lever moves smoothly. Make sure the lever is in the correct position. Make sure the shift lever can be moved to...
AT switch cable — adjustment Set the shift lever to N (neutral). Release the control cable from the shift lever. Disconnect the cable and lever. Set the manual shift lever to position N. Rotate...
System pressure — regulation Drain the automatic transmission fluid. Remove the oil pan. Remove the oil filter and oil temperature sensor. Remove the valve body. This may cause the manual control...
Removal and installation of automatic transmission Transmission controls 1 - switch blocking solenoid; 2 - control cable; 3 - bushing; 4 - adjusting bolt; 5 - nut; 6 - parking position switch; 7 - connector for position...
Disassembly and assembly of automatic transmission WARNING: Because the automatic transmission is made up of a number of precision-manufactured parts, these parts must be handled with great care during disassembly and...
Towing vehicles with automatic transmission When the vehicle is being towed, the gearshift lever must be in the N position Maximum towing speed 50 km/h Maximum towing range 50 km. When towing long distances, it is...
Diagnostics of malfunctions of automatic transmission Output of diagnostic trouble codes Attach a special tester to the diagnostic socket. The figure shows a typical tester for displaying automatic transmission fault codes....