Set the shift lever to N (neutral).
Release the control cable from the shift lever. Disconnect the cable and lever.
Set the manual shift lever to position N.
Rotate Switch Housing (1| gearbox until the 12mm wide end of the manual shift lever (2) will not fit against the 12mm wide flange of the switch body.
Tighten the fixing bolts (3) the required moment.
Make sure the shift lever is in the N position.
Adjust the nut so that the control cable has no slack and check that the forward shift lever operates smoothly when shifting the shift lever.
Start the car and while driving, make sure that each gear is engaged in the gearbox in the desired position.