Bleeding the Clutch Hydraulic Drive (Mitsubishi Pajero 1)

1. Fill the reservoir with fresh brake fluid (use of waste liquid is prohibited).

2. Unscrew the bleed nipple on the slave cylinder, attach a transparent hose to it and ask an assistant to press the clutch pedal all the way.

3. While pressing the pedal, tighten the nipple and ask the assistant to slowly release the pedal.

4. Repeat the procedure until no more air bubbles come out of the hose.

5. Constantly monitor the level, the tank must be completely filled with liquid.

6. When finished, tighten the nipple and restore the fluid level in the tank.

The original can be found on the website MitsubishiMan.ru