You can use the cigarette lighter when the ignition key is in the "ON" or "ACC" (Accessory) position. Push the cigarette lighter knob all the way in.
When the cigarette lighter is hot, it will automatically return to its original position with a click. Remove it from the socket and light it. After use, insert the cigarette lighter into the socket in its original position.
Note: Do not leave the cigarette lighter removed from its socket, as a foreign object may enter it and cause a short circuit.
Caution! To avoid getting burned, do not touch the heating element or the body of the cigarette lighter, hold it only by the handle.
To avoid burns, do not allow children to operate or play with the cigarette lighter.
If after pressing the cigarette lighter handle it does not pop back up after about 30 seconds, then something is wrong with it. Keeping the cigarette lighter pressed for a long time can cause a fire.
(The original material is here: «MITSUBISHIMAN.ru»)
Do not leave the cigarette lighter in the fully recessed position, and do not insert a cigarette lighter from another car into the socket. This may cause the cigarette lighter to overheat and cause a fire.
It is recommended to insert only the cigarette lighter itself into the cigarette lighter socket. Using additional devices inserted into the cigarette lighter socket may damage the socket and cause the cigarette lighter to be poorly held in it.
If the cigarette lighter socket is used as a power source for any additional electrical equipment, make sure that this electrical equipment is rated for 12 V and its power does not exceed 120 W. Remember that prolonged use of additional electrical equipment with the engine off can lead to battery discharge.