1. Normal position.
2. Against blinding.
At the bottom of the mirror there is a lever A, which allows you to adjust the position of the mirror to reduce the blinding effect of the headlights of cars driving behind you at night.
Warning! Do not attempt to adjust the rearview mirrors while driving. This may be dangerous. Adjust before driving.
External rear view mirrors with remote control
L – adjustment of the left outside rearview mirror.
R – adjustment of the right outside rearview mirror.
The outside rearview mirrors can be controlled when the ignition key is in the "ON" or "ACC" position. Move lever A to the side where the mirror to be adjusted is located.
Note: After adjustment, return the lever to the [–] position.
The article was obtained from this portal: MitsubishiMan
To adjust the mirror left, right, up or down, press the corresponding side of switch button B.
- 1. Up.
- 2. Down.
- 3. To the right.
- 4. To the left.
The outside side rearview mirror can be pressed against the car door glass to avoid damage when parking in tight spaces.
Warning! Do not attempt to adjust the position of the outside rearview mirrors while the vehicle is moving. This may be dangerous. Adjust them before driving.
It should be taken into account that rear-view mirrors have a convex surface. Therefore, objects reflected in them appear smaller and more distant than when observed with a regular flat mirror. Therefore, when changing lanes, do not use these mirrors to estimate the distance to the vehicle driving behind.
Heated exterior rear view mirrors
 |  |
When the rear window defroster switch is pressed to the "ON" position, the outside rearview mirrors are also heated to eliminate fogging or ice (on some models). Current flows through heating elements inside the mirrors, thereby clearing them of frost or condensed water droplets. The indicator lamp C will light when the heating is operating. After approximately 20 minutes, the heater will automatically switch off.