Contents: Removal ⤓ Installation ⤓
Rear view mirror elements
1 - connector; 2 - mirror; 3 - body; 4 - gasket; 5 - outer cover; 6 - frame; 7 - lid; A - Manually controlled mirror; B - electrically adjustable mirror.
Removal
Remove the front door trim.
Using a screwdriver blade as a lever, remove the inner delta cover. Loosen the screw and remove the inner cover frame.
Remove the outer cover.
Loosen the screw and remove the mirror control handle.
Remove the two screws and remove the side rearview mirror housing and gasket.
Turn the mirror by hand so that its reflective surface is facing up, insert the tip of a flat-head screwdriver (2), wrapped with insulating tape, into the recess, pry up the mirror (1) and remove it.
If your vehicle has a power mirror, disconnect the electrical connector from the wiring harness.
Installation
Installation is carried out in reverse order.