Rear window/external rear view mirror heating switch (Mitsubishi Galant 6)

1. Turning on the electric heating allows you to remove condensation, frost, and even thin ice from the surface of the rear window. The electric heating switch is located on the heater/air conditioner control panel.

Note: On appropriately equipped models, the heated outside rearview mirrors are also activated at the same time as the heated rear window.

2. When the heating is turned on, the indicator light built into the switch button lights up.

3. To turn off the heating, press the button again.

Note: On models equipped with an air conditioning system, the glass heating is switched off automatically after 20 minutes according to the timer signal. Do not forget to check the quality of the view through the rear window of the car before starting to drive.

4. The thread-like mesh of the heater heating element is glued to the inner surface of the rear window and requires careful handling - try not to damage the mesh when wiping the glass. Wiping should be done only along the threads of the heater.