Contents: Removal ⤓ Installation ⤓
Door elements
A - front door; B - rear door; 1 - door limit switch; 2 - lid; 3 - retainer; 4 - lower loop; 5 - upper loop; 6 - door; 7 - pin; 8 - wire connector.
Removal
Open the door and support it with a jack through a wooden block. Disconnect the electrical connector of the wiring harness from the mirror, window lifters and central lock.
Loosen the bolts securing the door opening stop.
Use a punch to knock out the split pins and remove the door.
Loosen the bolts and remove the door hinges.
Loosen the screw and remove the cover, remove the door limit switch.
Installation
Installation is carried out in reverse order, taking into account the following:
The source of the article is available at: mitsubishiman.ru
Lubricate the door hinges with grease.
Install the door opening limiter so that the marking (1) is on top and tighten it with the bolts.
