Contents: Removal ⤓ Installation ⤓
Removal
Remove the headrest (1) from the guides (5).
After lifting the rear seat cushion, unscrew the seat hinge mounting bolts and remove the seat cushion (2).
Loosen the screw at the bottom of the side support.
By moving the support forward and downward, remove the seat back side support assembly (3).
[The original article was published on mitsubishiman.ru]
Loosen the bolts at the bottom of the rear seat back and remove it as an assembly (4).
Unscrew the two bolts and remove the rear seat limiter (6).
Installation
Installation is carried out in reverse order.