Driver's seat cushion front edge height adjustment knob
1 - Raise
2 - Lower
Driver's seat rear edge height adjustment knob
3 - Raise
4 - Lower
Lever for adjusting the position of the lumbar support of the driver's seat back
1 - Very soft stop; 2 - Soft stop; 3 - Solid stop; 4 - Very hard stop
Adjusting the position of the front seat in the longitudinal direction
1 - Forward
2 - Back
Seat back tilt adjustment
1 - Raise
2 - Lower
Manual seats
1. The seat must be installed in a position that provides the driver with maximum comfort when operating the pedals, steering wheel and switches on the instrument panel. In addition, good visibility through the windshield and the safety of fixing the driver's body with a seat belt must be ensured. The seat position controls are located on the outside of the seat cushion.
2. Seats must be adjusted before driving.
3. Do not use any pillows or other items placed on the cushion or seat back.
4. Remember that excessive inclination of the seat back significantly reduces the effectiveness of the seat belt!
Fore and aft seat adjustment
Pull the control lever towards you and slide the seat assembly to the desired position. After completing the adjustment, release the lever and make sure that the seat is secure by moving it back and forth with the lever released.
Seat back tilt adjustment
Attention! In order to improve the efficiency of the functioning of safety elements (belts and pillows) The backrests of the front seats must be in an upright position while driving!
1. Pull up on the lock lever and recline the seatback to the desired position. The backrest locks automatically when the lever is released.
2. The seatback tilt mechanism is equipped with a spring that, when the lock lever is pulled, returns the seatback to the upright position. When retracting the lever, press your back against the seatback or hold it with your hand.
Seat height adjustment (driver's seat only)
1. Height adjustment of the front edge of the driver's seat cushion can be made using the rotary knob located in front of the outer side wall of the cushion.
2. The driver's seat rear edge height adjustment knob is located behind the seat fore and aft adjustment lever.
Lumbar support adjustment (driver's seat only)
The lumbar support adjuster is located on the outer side surface of the driver's seat backrest and has four fixed positions: very soft stop, soft stop, hard stop and very hard stop.
Power seats
1. The switch panel for controlling the operation of the electric position of the front seat is located on the outside of the cushion of the latter.
2. Pressing the button automatically moves the seat to the desired position.
3. Seats must be adjusted before driving.
4. Do not use any pillows or other items placed on the cushion or back of the seat.
5. Remember that excessive inclination of the seat back significantly reduces the effectiveness of the seat belt!
Fore and aft seat adjustment
Adjustment is made by moving the lower control panel slide switch in the appropriate direction.
Backrest tilt adjustment
The seat back is adjusted using the upper control panel lever switch.
Seat cushion height adjustment (driver's seat only)
1. Height adjustment of the front edge of the driver's seat cushion is carried out by pushing the front end of the control panel slider switch in the appropriate direction.
2. To adjust the height of the rear edge of the cushion, press the rear edge of the slide switch in the appropriate direction.
3. It is also possible to adjust the position of the pillow as a whole - you should press the switch, holding it in a horizontal position.