Power window main switch design (models with a drive to the regulators of all four doors)
1 - Driver's door regulator drive; 2 - Right front door regulator drive; 3 - Left rear door regulator drive; 4 - Right rear door regulator drive; 5 - Lock button
Power window main switch design (models with a drive to the regulators of the front doors only)
1 - Driver's door regulator drive; 2 - The drive of the regulator of the right front door; 5 - Lock button
Sunroof function control switch
1 - Slightly open; 2 - Close; 3 - Fully open
Attention! Make sure the wiper arms are in the lowered position before opening the hood to avoid damage to the paintwork!
1. To release the latch of the hood lock, pull the special lever towards you, located on the left under the instrument panel of the car.
2. To open, push the safety latch lever up.
3. Immediately support the hood in the upper position with a special stop.
4. To close the hood, remove the support bar, then slowly lower the hood to a height of approximately 30 cm from the closed position and release it so that it falls under its own weight. If the hood does not close on the first try, release it from a slightly higher height.
Attention! To avoid deformation of the cover, do not press the hood with your hands!
5. Before driving, make sure that the hood is securely locked in the closed position - a loosely closed hood can suddenly open while driving, which will reduce the driver's field of view to zero!