Removal LANCER
Pull forward both levers located at the front edge of the rear seat bench, simultaneously lifting the seat. On models prior to 8.88, remove the screws instead of the levers. Pull out the seat.
Loosen the two lower bolts at the seat back. For a composite seat (tiltable), the back must be removed from the hinges.
Press the seat bench up out of the hooks and remove.
Place and secure the seat back.
First place the seat bench under the backrest and then snap it into place in the holders at the bottom.
Removal COLT
Fold the back of the rear seat down and loosen the hinge bolts.
Lift the seat bench and remove it from the brackets.
Installation
Insert and secure the bench and backrest in the reverse order.