Fuel injection system (MPI) of a car Mitsubishi Outlander 1

General information about the fuel supply and injection system
Main characteristics of the system The distributed fuel injection system consists of sensors that record the engine status, an electronic engine control unit...

Fuel injection system diagnostics
Type of self-diagnostic system On models with a self-diagnosis system such as EOBD or OBD-II, the standard diagnostic code consists of one letter and 4 digits (for...

Technical operations on the car
Adjusting the base idle speed Note: The nominal idle speed is adjusted at the factory by the idle speed adjustment screw (SAS) and usually does not require further...

Removal and installation injectors
Removal the fuel manifold/injectors Remove the fuel manifold together with the injectors installed on it. Caution: Be careful not to drop the injectors when removing the...

Removal and installation the throttle body
Removal Drain the coolant. Remove the air filter. Remove the throttle body in the sequence shown in the figure. Installing the Throttle Body Gasket Position the gasket...

Fuel injection control system
Note: The vehicle is equipped with a suspended pedal and throttle cable. Basic data for adjustments and control Checking and adjusting the accelerator pedal cable Turn...

Fuel vapor recovery system
The fuel vapor recovery system, as its name suggests, is designed to prevent fuel vapors generated in the fuel tank from entering the atmosphere. From the fuel tank,...

Exhaust Gas Recirculation (EGR) System
The exhaust gas recirculation (EGR) system reduces nitrogen oxide (NOx) emissions. When the air-fuel mixture burns at a high temperature in the combustion chamber, a...

Intake and exhaust systems — removal, inspection and installation
Removal and installation the air cleaner Remove the air intake. Remove the air flow sensor connector. Remove the air filter together with the air flow sensor. Disconnect...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Similar materials for other Mitsubishi models

➤ Gasoline engines: Injection system MPI Mitsubishi Colt 5 (1995-2003, petrol)
➤ Power unit: Fuel injection Mitsubishi Lancer 3 and 5 (1984-1992)

Share with friends:

Link in different formats to this section

TEXTHTMLBB Code