Typical design of the front seat belts on a 2-door (up) and on 4-door body
1. Overlay of an average rack of a body; 2. Belts; 3. connector; 4. Lock buckle
Typical Design of Rear Seat Belts on 2-Door (up) and on 4-door body
1. Tension cover
2. Belts
Belts are attached to the body with bolts closed with plugs.
1. Remove the plugs and unscrew the bolt securing the belt tensioner, upper and lower belt mounts.
2. When removing the belt, identify and disconnect the reminder switch wires (if provided).
3. Installation is carried out in the reverse order.
4. Tighten the fasteners to the required torque.