Contents: Removal ⤓ Installation ⤓
Removal
To remove the rear seat, follow these steps.
Fig. 17.69. Rear seat: 1 – headrest; 2 – headrest guide; 3 – rear seat limiter; 4 – rear seat back assembly; 5 – seat back side support assembly; 6 – bolt (25 Nm); 7 – seat cushion
1. Remove headrest 1 (Fig. 17.69).
2. Lift the rear seat cushion, unscrew the seat hinge mounting bolts and remove seat cushion 7.
3. Loosen the screw at the bottom of the side support, then move the support forward and downward to remove the seat back side support 5 assembly.
4. Unscrew the bolts at the bottom of the backrest 4 of the rear seat and remove it as an assembly.
5. Unscrew the two bolts and remove the rear seat limiter 3.
Installation
Installation is carried out in the reverse order of removal.
The original article was published on: MitsubishiMan.ru