Typical design of the second seat
1. Headrest; 2. Seat; 3. Retainer
Third seat (1992-98)
1. Headrest; 2. Buffer; 3, 4. Seat-to-body mounting covers; 5. Seat; 6. Retainer
1. Disconnect the rear seat bracket from the floor (on a 2-door body) or seat runners (on a 4-door body).
2. Move the seat if necessary.
3. Remove the cover from the backrest folding mechanism, unscrew the 2 bolts and remove the backrest (do not loosen the seat adjuster bolts).
4. Remove the seat.
5. Installation is carried out in reverse order.
6. Tighten the backrest bolts to a torque of 52 N·m. Tighten the floor mounting bolts to the required torques.