Front suspension shock absorber strut (Mitsubishi L200 4)

Disassembly is carried out in the order shown in Fig. M2 5.0721.

Elements of the shock absorber strut design: 1. Self-locking nut (replace with a new one during assembly); 2. Saddle; 3. Upper bushing; 4. Spring bracket assembly; 5. Spring top lining; 6. Cuff; 7. Upper bushing; 8. Cap; 9. Dust cover; 10. Coil spring; 11. Shock absorber

Assembly is carried out in the reverse order of disassembly.

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article was reviewed by: Nikita Romanov

Share with friends:

◀ Previous

L200 4: Car suspension

Next ▶

Front suspension shock absorber — removal and installation
Upper control arm front suspension
Front suspension performance specifications
Front wheel suspension for vehicles with all-wheel drive (4WD)
Front wheel suspension for vehicles with rear wheel drive (2WD)

Lower control arm of the front suspension
Front suspension anti-roll bar
Description of the rear suspension design
Disassembly and assembly of rear wheel suspension

Similar materials for other Mitsubishi models