Contents: Identification plate of the model…⤓ Model range ⤓ Decoding the model code ⤓ Chassis number ⤓ Vehicle weight rating plate ⤓ Identification plate for a…⤓ Engine number ⤓
The following information means are used to identify the vehicle:
- identification plates;
- identification plate for the vehicle model and its configuration;
- vehicle weight rating plate;
- vehicle identification code (VIN code) - part of the chassis number.
Identification plate of the model and configuration of the vehicle
The identification plate is riveted to the rear wall of the engine compartment on the right (in the direction of vehicle travel).
Model range
The table shows a list of designations of the main models.
Decoding the model code
Example: KV4TNJNUZL6
[The original was published on the website: MITSUBISHIMAN]
Chassis number
The chassis number is stamped on the frame (1) near the right rear wheel (see Fig. 3).
The chassis number contains the following information.
Vehicle weight rating plate
The plate is riveted to the bulkhead of the engine compartment on the left (in the direction of the vehicle).
| 1 | Chassis No |
| 2 | Maximum permissible gross weight |
| 3 | Curb weight |
| 4 | Maximum front axle load |
| 5 | Maximum rear axle load |
| 6 or 7 | Car model |
Identification plate for a right-hand drive vehicle
The plate is located on the left side of the instrument panel under the windshield.
Engine number
The engine model number and serial number are stamped on the top of the cylinder block.
Engine model number is 4D33.
Serial number - from AA201 to YY9999.
