Contents: Engine number ⤓ Chassis number (VIN) ⤓ Model identification plate ⤓ Engine specifications ⤓
Engine number
1. The engine model number is stamped on the top of the cylinder block as shown in the figure. The engine serial number is stamped next to the engine model number.
2. The engine serial number consists of 6 characters. The sequence of changing the characters of the number is shown in the figure:
Chassis number (VIN)
The chassis number is stamped on the engine compartment bulkhead on the engine side as shown in the figure.
Model identification plate
The identification plate is riveted to the engine compartment bulkhead. The corresponding line on the plate indicates the engine model.
The material is based on data from the website MitsubishiMan.ru
Table. Decoding the identification plate of a car model (example).
Engine specifications
Note:
- The power and torque values given are approximate and may vary depending on the specific model and year of manufacture, but in most cases the error does not exceed ±5%.
- The values of compression ratio, cylinder diameter and piston stroke are given in the corresponding chapter "Engine - mechanical part".
| Engine model | Working volume, cm³ | Cylinder head type | Power, hp at rpm | Torque, Nm at rpm |
| 4G15-GDI | 1468 | DOHC | 100/6000 | 137/3500 |
| 4G93-GDI | 1834 | DOHC | 130 / 6000 | 177/3750 |
| 4G15-MPI | 1468 | SOHC | 90 /5250 | 133/3750 |
| 4G93-MPI | 1834 | SOHC | 116/5500 | 160/4000 |