After turning the ignition key to the "ON" position, the display sequentially shows five readings (trip meter A readings, trip meter B readings, average fuel consumption, vehicle range on the remaining fuel in the tank, outside air temperature), and then the display starts showing the data that was recorded before the ignition key was last turned to the "OFF" position.
Note: If you press the reset button during the mode change process described above, the mode change will stop and the display will show the value that was recorded before the ignition key was last turned to the "OFF" position.
Switching display readings
Each short press (less than 1 sec) of the reset button switches the readings. Readings of trip meter A = readings of trip meter B = average fuel consumption = vehicle range = outside temperature.
(The original material is here www.MitsubishiMan.ru)
Warning! Do not switch the reset button while driving. It is dangerous. Set all indicators before starting to move the car.
Note: The brightness of the display readings can be changed according to your wishes.
The display values may vary depending on the conditions in which the vehicle is driven (road conditions, driving style, etc.). Therefore, the display values are used as reference values and may differ from the actual values.