Disassembly and assembly of the interaxle differential mechanism of the Super select transfer case (Mitsubishi L200 4)

Before disassembling, mark the relative positions of the housing halves, as well as the internal parts of the differential.

Disassembly sequence: 1. Differential housing (A); 2. Mounting pin; 3. Satellites; 4. Thrust washers; 5. Crosspiece with satellite axes; 6. Differential housing (B)

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article was reviewed by: Nikita Romanov

Share with friends:

◀ Previous

L200 4: Transfer case

Next ▶

Disassembly and assembly of the synchronizer for engaging the front drive of the Super select transfer case
Removal and installation the drive gear of the Easy Select transfer case
Installation of limit switches — position sensors for parts of the transfer case mechanism
Transfer case assembly sequence
Installation of seals

Disassembling and assembling the gear shift fork
Disassembly and assembly of the output shaft of the rear drive of the Easy select transfer case
Disassembly and assembly of the output shaft of the rear axle drive of the Super select transfer case
Transfer case adjustment parameters

Similar materials for other Mitsubishi models

➤ Transfer case — design description Mitsubishi Colt 5 (1995-2003, petrol)
➤ Checking the Transfer Case Oil Level (4WD Models) Mitsubishi Lancer 9 (2000-2007, petrol)
➤ Transfer Case Lubricant Replacement — Galant 4WD Only Mitsubishi Galant 6 and 7 (1987-1998)
➤ Transfer case oil change (4WD) Mitsubishi Outlander 1 (2003-2008)
➤ Changing the oil in the transfer case Mitsubishi Pajero 1 and 2 (1982-1999)
➤ Adjusting the timing belt tension of the gas distribution… Mitsubishi Carisma (1995-2004)

Link in different formats to this article

TEXTHTMLBB Code

Comments and feedback from visitors

No comments yet