2. Turn the crankshaft clockwise and set the piston of the 1st cylinder to TDC of the compression stroke.
3. Loosen the timing belt tensioner lock nut.
Fig. 4.14. Using a special tool to check and adjust the timing belt: 1 – special tool МВ996032; 2 – bolt M6; 3 – lock nut
4. Install the special tool on the drive belt and the timing belt tensioner (Fig. 4.14).
5. Using the M6 bolt, tighten the timing belt, the belt deflection should be 7.5 mm.
6. Tighten the lock nut to 50 Nm.
7. Install the timing belt cover.
The article is based on data from the website (MITSUBISHIMAN.ru)