Contents: Removal ⤓ Installation ⤓
Removal
To remove, follow these steps in sequence.
1. Disconnect the cable from the negative terminal of the battery.
2. Drain the engine oil from the engine.
3. Remove the front bumper.
Fig. 4.21. Engine oil radiator: 1 – bypass bolt, 30–34 Nm; 2 – gasket; 3 – bolt, 10 Nm; 4 – oil radiator hoses assembly; 5 – bolt, 10 Nm; 6 – bolt, 12 Nm; 7 – bolt, 25 Nm; 8 – engine oil cooler; 9 – bolt, 25 Nm
The original material is posted on the website [mitsubishiman.ru]
4. Unscrew the bypass bolt 1 (Fig. 4.21), disconnect the hoses and remove the gaskets 2.
5. Unscrew the fastening brackets and remove the oil radiator hoses 4 as an assembly.
6. Loosen the bolts and remove the engine oil cooler 8.
Installation
Installation is carried out in the reverse order of removal, taking into account the following.
Fig. 4.22. Installing the protrusions (1) of the hose connecting elements into the oil radiator seat
Install the protrusions of the hose connecting elements into the seat of the oil radiator and secure the hoses as an assembly (Fig. 4.22).
1. Pour engine oil into the engine.
2. Install the front bumper.