Wheels and tires (Mitsubishi Lancer 3)

COLT/LANCER models can be equipped with various wheel disks and tires. However, only disks with a pressing depth of 46 mm are allowed to be installed. The pressing depth is the distance from the center of the disk to the surface of the wheel mating to the brake disk or drum.

All wheel disks are so-called hump disks. A hump is a projection pressed into the disk shoulder that prevents the tubeless tire from coming off the disk even on the sharpest turns.

Please note: In the future, it may turn out that other tire pressures or other tire/rim combinations will be permitted for older vehicle models. It is therefore recommended that you obtain up-to-date information from a service station.

The required tire pressure is also indicated on a sticker on the driver's door frame.

Note: The law requires the use of tires with a tread depth of at least 1.6 mm. However, for safety reasons, it is recommended to replace summer tires with a tread depth of 2 mm and winter tires with a tread depth of 4 mm.