Checking the brake fluid levels in the master cylinder reservoir and in the clutch cylinder reservoir (Mitsubishi L200 4)

1. The fluid level in the tank should be between the "MAX" and "MIN" marks.

2. If the level is below the "MIN" mark, it is necessary to top up to the "MAX" mark.

Note: If the brake fluid level drops noticeably over a short period of time, this may indicate a leak in the system. The cause of the leak must be identified and corrected.

Note: As the brake linings wear out, the brake fluid level also decreases, so it is necessary to top up the fluid in the reservoir in a timely manner.

The manufacturer recommends using DOT3 or DOT4 fluid as the working fluid in the brake and clutch system.



The article is reprinted from a web resource www.mitsubishiman.ru