Checking the oil level in the transfer case (4WD) (Mitsubishi Outlander 1)

Unscrew the oil filler plug from the housing.

The oil level should be at the bottom of the oil filler hole.

Make sure the oil is free from visible contamination and has the correct viscosity.

Tighten the mounting nuts to the recommended torque.

Tightening torque: 32±2 Nm.

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article was reviewed by: Arseny Pavlov

Share with friends:

◀ Previous

Outlander 1: Mechanical gearbox

Next ▶

Checking the oil level in a manual transmission
Checking the oil level in the gearbox and transfer case (4WD)
Checking the transmission performance in all ranges

Changing oil in a manual transmission
Transfer case oil change (4WD)
Design and description of mechanical transmission
Gears and gear shift lever
Differential and transmission oil

Similar materials for other Mitsubishi models