Contents: Removal and installation ⤓ Examination ⤓ Table. Checking the remote control…⤓ Table: Switch checks (models with…⤓ Table: Checking the remote control…⤓ Table. Checking the remote control…⤓
Removal and installation
− The parts are removed in the order of the numbers indicated in the figure "Removing the side rear-view mirror".
Removal the side rearview mirror. 1 - plug, 2 - inner decorative cover, 3 - side rear-view mirror assembly, 4 - side rear-view mirror housing assembly, 5 - mirror element, 6 - side instrument panel trim, 7 - side rear-view mirror control switch.
- When removing parts, pay attention to the operation of removing the mirror element.
Press the top of the mirror element with your hand to make it turn. Wrap the flat-head screwdriver with protective tape. Insert the flat-head screwdriver into the opening of the mirror housing as shown in the figure, lift the mirror element and remove it from the support plate.
− Installation of parts is carried out in the reverse order of removal.
- When installing the parts, pay attention to the operation of installing the mirror element.
While holding the backing plate with a flat-head screwdriver, press down on the mirror element until the latches snap into place on the backing plate.
Examination
1. Checking the remote control of the side rearview mirrors.
Check the direction of movement of the mirror element with different connections of the battery terminal wires to the connector terminals according to the table provided.
Table. Checking the remote control of the side mirrors (models with automatic folding side rear-view mirrors).
The text of the article was taken from the website [MitsubishiMan.ru]
| Direction of movement | Connecting power to the terminals |
| Up | 7(+)-5(-) |
| Down | 7(-)-5(+) |
Table: Switch checks (models with automatic folding side rearview mirrors).
Table: Checking the remote control of the side mirrors (models with automatic folding side rearview mirrors) (continued).
Table. Checking the remote control of the side mirrors of the model without the automatic folding system of the side rear-view mirrors).
2. Checking the side rearview mirror control switch.
Check the condition of the circuit between the terminals at different switch positions according to the table provided.
3. Checking the side mirror heaters.
For models with heated side mirrors, make sure there is no open circuit between terminals "1" and "4".
