Contents: Removal the control rod/lower…⤓ Disconnecting the upper control arm…⤓ Stabilizer bar connection ⤓
Removal the control rod/lower control arm assembly
After making a timing mark on the toe or camber adjusting bolt, disconnect the control rod or lower arm assembly.
Disconnecting the upper control arm assembly/lower control arm assembly and trailing arm
(The material was created based on the website mitsubishiman)
With the lower control arm supported by a jack, remove the upper control arm/lower control arm assembly and trailing arm.
Stabilizer bar connection
Tighten the self-locking nut until the protruding threaded portion of the anti-roll bar reaches the nominal length.
Nominal value A: 6-8 mm.