Removal and installation
− The parts are removed in the order of numbers shown in the figure "Removing the accelerator pedal".
Removal the accelerator pedal. 1 - connection of the inner cable to the accelerator pedal, 2 - accelerator pedal assembly, 3 - accelerator pedal pad, 4 - lock washer, 5 - accelerator pedal, 6 - bushing, 7 - return spring, 8 - stopper, 9 - accelerator pedal mounting bracket, 10 - connection of the inner cable to the throttle sector, 11 - accelerator pedal cable, 12 - accelerator pedal travel limiter.
− Installation is carried out in the reverse order of removal.
− When installing the parts, pay attention to the operation of installing the accelerator pedal limiter.
The original article is on MitsubishiMan
Before installation, warm up the accelerator pedal cover clips with a hair dryer or other device.
Note: To facilitate installation, apply a small amount of soap solution to the accelerator pedal pad clips.
− After completing the installation of the parts, adjust the free play of the accelerator pedal cable.