1. Remove the front door trim.
2. Remove the outer trim of the front door glass.
3. Remove the outside rearview mirror (1).
4. Remove the mirror (2).
Attention:
Do not carry out work at ambient temperatures below 20 *C, as the mirror is very fragile at low temperatures and may crack.
- 1) Move the mirror up manually. Then insert a flat-head screwdriver, wrapped with protective tape, between the mounting plate and the resulting hole in the mirror. Press the catch and release the bottom of the mirror as shown in the picture.
- 2) Release the upper part of the mirror from the grips as shown in the lower figure.
- 3) Disconnect the mirror heating system connectors.
5. Remove the outer cover of the outside rearview mirror (3).
1) Remove the outer cover of the outside rearview mirror by releasing the catches in the order shown in the figure.
The article was taken from the website mitsubishiman.ru
6. Remove the outside rearview mirror housing cover (models with side turn signal repeater on the front wing) (4).
7. Remove the side turn signal repeater (models with side turn signal repeater and exterior rearview mirror illumination lamp) (5).
8. Remove the lower cover of the instrument panel.
9. Remove the outside rearview mirror adjustment switch (6).