Attention! The distance to the object reflected in the outer (relative to the boundary line) part of the rear-view mirror differs from the distance to the object reflected in the inner part. The object that you see in the outer (relative to the boundary line) part of the mirror will seem more distant than in reality (more distant than it would seem in a normal flat mirror, i.e. when compared with the object reflected in the inner part of the mirror).
The inner part of the mirror gives the same image that can be seen in a regular mirror. The outer part of the mirror provides a wider viewing angle.
Manually controlled exterior rear view mirrors
Fig. 1.40. Directions for adjusting the outside rearview mirror in the horizontal (1) and vertical (2) planes
Adjust the mirrors by moving the lever in the directions indicated by the arrows in Fig. 1.40.
External rear view mirrors with remote control
The outside rearview mirrors can be controlled when the ignition key is in the "ON" or "ACC" position. Move the lever А (Fig. 1.41) in the direction where the mirror requiring adjustment is located: L – adjustment of the left outside rearview mirror, R – adjustment of the right outside rearview mirror.
Fig. 1.41. Location of the selection lever (A) and button (B) of the switch for adjusting the position of the outside mirror: L – left outside rearview mirror adjustment; R – adjustment of the right outside rearview mirror: 1 – up; 2 - down; 3 – to the right; 4 – to the left
Note: After adjustment, return the lever to the middle position (•).
To adjust the mirror left, right, up or down, press the corresponding side of the switch button В:
- 1 - up;
- 2 - down;
- 3 - to the right;
- 4 - to the left.
The material was created based on the website: MitsubishiMan