Contents: Removal the lamp ⤓ Installing the lamp ⤓
Removal the lamp
1. Remove the 5 clips (A), then remove the cover (B).
2. Press the tab (C) on the wiring connector and pull the connector to remove it.
3. Remove the lamp holder (D) by turning it counterclockwise.
Attention:
- Care must be taken when handling halogen lamps. The gas in the halogen lamp bulb is under high pressure, so if it falls, is hit, or touches a hard object, it may rupture.
- Do not touch the halogen bulb with your hands, dirty gloves, etc. When turning on the headlight, the grease from your hands may damage the bulb. The dirty glass surface should be wiped with alcohol, paint thinner, etc. The lamp should be installed only after thorough drying.
Installing the lamp
Repeat the above steps in reverse order. To secure the lid clamps, press the pin (E).
