Contents: Removal ⤓ Installation ⤓
Removal
Remove the fastening of the left lower trim panel of the switches "1", as well as the trim panel of the steering column "2", see Fig. K-5806.
Remove clamp "3" and remove the ignition switch back from the lock cylinder.
Insert the key into the ignition switch and turn it to the "ACC" position.
Press the locking pin in the steering wheel lock hole with a wire or a small Phillips-head screwdriver and at the same time pull out the lock cylinder.
Installation
Insert the lock cylinder with the key inserted and allow the pin to snap into place.
Install the ignition switch and clamp.
Install the switch panel trim.