Connecting rod and piston group — design description (Mitsubishi L200 4)

Connecting rod and piston group: 1. Nut; 2. Connecting rod cap; 3. Lower insert; 4. Piston and connecting rod assembly; 5. Upper insert; 6. Compression ring No.1; 7. Compression ring No.2; 8. Oil scraper ring; 9. Retaining ring; 10. Piston pin; 11. Piston; 12. Retaining ring; 13. Bolt; 14. Connecting rod
The elements are removed in the order of the numbers indicated in the figure

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article was reviewed by: Nikita Romanov

Share with friends:

◀ Previous

L200 4: Diesel engine

Next ▶

Checking and adjusting camshafts and valves
Installing the intake camshaft covers
Installing the intake camshaft assembly
Installing an additional gear on the intake camshaft
Installing the exhaust camshaft bearing caps

Removal the connecting rod caps
Removal the piston with connecting rod assembly
Assembly of connecting rod, piston, pin, piston rings
Installing oil scraper and compression rings
Checking piston rings

Similar materials for other Mitsubishi models