Differential design elements (for vehicles not equipped with a differential lock): Locking bar; 2. Side bearing adjusting nut; 3. Differential side bearing cover; 4. Differential assembly; 5. Outer race of the differential side bearing; 6. Inner race of the differential side bearing with rollers and separator; 7. Driven gear of the main transmission; 8. Satellite axle locking pin; 9. Axle of satellites; 10. Satellite; 11. Satellite washer; 12. Half-shaft gear; 13. Intermediate adjustment ring of the axle gear; 14. Differential housing; 15. Limited slip differential housing; 16. Self-locking nut (replace with a new one during assembly); 17. Washer; 18. Drive shaft-gear assembly; 19. Front adjusting washer of the drive pinion shaft (for adjusting the preload of the drive pinion); 20. Distance sleeve of bearings of the drive shaft-pinion; 21. Inner race of the rear bearing of the drive shaft-pinion; 22. Rear adjusting washer of the main shaft-pinion (for adjusting the engagement in the main pair); 23. The drive shaft-gear itself; 24- Shank flange; 25. Oil seal (replace with a new one during assembly); 26. Inner race of the front bearing of the drive shaft-pinion; 27. Outer race of the front bearing of the drive shaft-pinion; 28. Outer race of the rear bearing of the drive shaft-pinion; 29. Differential housing