Differential design elements (for vehicles not equipped with a differential lock): 1. Differential housing; 2. Outer race of the rear bearing of the drive shaft-pinion; 3. Outer race of the front bearing of the drive shaft-pinion; 4. Drive shaft-gear; 5. Rear adjusting washer of the main shaft-pinion (for adjusting the engagement in the main pair); 6. Inner race of the rear bearing of the drive shaft-pinion; 7. Inner race of the front bearing of the drive shaft-pinion; 8. Oil seal (replace with a new one during assembly); 9. Front adjusting washer of the drive pinion shaft (for adjusting the preload of the drive pinion); 10. Distance sleeve of bearings of the drive shaft-gear; 11. Drive shaft-gear assembly; 12. Shank flange; 13. Washer; 14. Self-locking nut (replace with a new one during assembly); 15. Differential housing; 16. Limited slip differential housing; 17. Intermediate adjustment sleeve of the axle gear; 18. Half-shaft gear; 19. Satellite washer; 20. Satellite; 21. Axle of satellites; 22. Satellite axle locking pin; 23. Driven gear of the main transmission; 24. Inner race of the differential side bearing with rollers and separator; 25. Outer race of the differential side bearing; 26. Differential assembly; 27. Differential side bearing cover; 28. Side bearing adjusting nut; 29. Locking bar
(The original material is here: mitsubishiman)