1 - servo pump pulley,
2 - air conditioning belt tension roller,
3 - water pump pulley,
4 - servo pump V-belt,
5 - generator V-belt,
6 - air conditioning V-belt,
7 - generator pulley,
8 - crankshaft pulley,
9 - air conditioning compressor pulley.
Check the tension of the V-belt in the middle between the two pulleys -arrows-.
To do this, pull the belt or press on the belt with a force of 100 N (10 kg). Measure the resulting belt deflection and compare it with the specified value.
If the measured value is outside the tolerance, adjust the belt tension.
