Parts of rear license plate light
1. Plafond; 2. Lamp; 3. Gasket; 4. Casing; 5. Plug
1. Turn away screws and remove a plafond.
2. Replace the lamp (the lamp comes out of the holder).
3. To remove the lamp assembly, do the following.
4. Remove plafonds and lamps.
5. Remove gaskets.
6. Remove the inner panel of the rear compartment door.
7. Disconnect the connector and unscrew the nuts securing the lamp housing (on 1992-98 models. additionally press the latches).
8. Remove the cover with the plug.
9. Assembly is carried out in the reverse order.