Wheel alignment angles | |
Wheel alignment | |
| 0±1.86 mm (0° ±18') |
| 1.86±1.86 mm (1°18' ±18') |
20° wheel rotation divergence | 2° |
Maximum turning angle | |
| 38° ±2° |
| 30°30' |
Wheel alignment | |
| 0° ±30' |
| -1° ±30' |
Angle of longitudinal inclination of the front wheel pivot axis | 4°20÷ ±1°30' |
Angle of the transverse tilt of the front wheel pivot axis | 7°20÷ ±1°30' |
Tightening force of threaded connections Nm | |
SRS | |
Airbag mounting screws | 5 |
Front suspension | |
Fastening the damper fork to the wishbone (Galant models 1994÷1998) | 88 |
Bolts securing the hub assembly to the steering knuckle | 88 |
Fastening the lower ball joint to the steering knuckle | 60÷72 |
Lower control arm mount | |
Models Diamante, Galant up to 1993 and since 1999. | |
Rear Mounting Clamp Fastening Bolts | 100÷120 |
Front Mounting Clamp Fastening Nuts | 40 |
Frame support through bolt | 102÷122 |
Galant models 1994÷1998. | |
Rear wishbone bolt | 98÷118 |
Lower arm reaction section mounting bolt | 83 |
Mirage Models | |
| 90 |
| 108 |
Nuts for fastening the upper supports of the pillars on the car body (Galant models 1994÷1998) | 44 |
Bolt for fastening the strut to the damper fork (Galant models 1994÷1998) | 88 |
Tie bolt for mounting the strut to the damper fork (Mirage models) | 103 |
Fastening the pillars to the body | |
Models Diamante, Galant up to 1993 and since 1999. | 45 |
Mirage Models | 40 |
Bolts for fastening struts to steering knuckles | |
Models Diamante, Galant up to 1993 and since 1999. | 90÷105 |
Mirage Models | 110÷130 |
Mounting clamp bolts for anti-roll bar rods | |
Galant models since 1994. | 39 |
Diamante Models | 44 |
Mirage Models | 22 |
Fastening the anti-roll bar struts to the damper forks (Galant models 1994÷1998) | 40 |
Steering tie rod end fastening nuts in steering knuckles | |
| 34 |
| 29 |
Tie rod end locknuts | |
| 42 |
| 49÷53 |
Upper ball joint mounting nuts in steering knuckles (Galant models 1994÷1998) | 28 |
Upper Control Arm to Axle Assemblies Through Bolts (Galant 1994-1998 Models) | 57 |
Upper control arm mounting nuts to body (Galant models 1994÷1998) | 86 |
Hub nuts | 200÷260 |
Steering | |
Manual drive | |
Upper steering shaft pinch bolt | 18 |
Rack mounting bolts | 70 |
Rail | |
Front | |
Fastening the inner tie rod ends to the rack | 88 |
Upper steering shaft pinch bolt | |
Diamante Models | 29 |
Other models | 18 |
Rack mounting bolts | |
Diamante Models | 70 |
Galant models up to 1993. | 60÷80 |
Galant models since 1994. | 70 |
Mirage Models | 70 |
Rear (Diamante models) | |
Rack mounting bolts | 70 |
Steering pump | |
Front Steering Pump Mounting Bolts | |
Mirage Models | 19 |
Galant models up to 1993. | 35÷45 |
Galant models since 1994. | 24 |
Diamante Models | 24 |
Rear steering pump mounting bolts | |
Galant models up to 1993. | 30÷45 |
Diamante Models | 24 |
Rear suspension | |
Hub nuts | |
Mirage models up to 1992. | 150÷200 |
Mirage models since 1993. | 180 |
Galant models with rear drum brakes up to 1993. | 27 |
Galant models with rear disc brakes up to 1993. | 200÷260 |
Lower control arm | |
Diamante Models | |
Lower arm to trailing arm mounting nut | 75÷89 |
Lower arm to beam mounting nut | 75÷89 |
Galant Models | |
Rear support | 100 |
Fastening the ball joint to the knuckle | 60÷72 |
Racks | |
Upper support nuts | |
| 45 |
| 40 |
| 44 |
| 28 |
| 98 |
Anti-roll bar mounting clamp bolts | |
| 39 |
| 45 |
Through bolts for fastening the longitudinal arms to the body | |
| 100÷120 |
| 100÷120 |
| 137÷157 |
| 140÷160 |
Upper ball joint mounting nuts | |
| 72 |
| 98 |
Upper control arm mounting bolts | |
| 160 |
| 39 |
| 75÷89 |
Hub mounting bolts | 74÷88 |
Steering wheel mounting nut | |
| 35÷45 |
| 45 |
| 40 |
Wheels | |
Wheel nuts | 90÷110 |
[The text of the article was obtained from the website: MITSUBISHIMAN]
