Manual Transmission Specifications (Mitsubishi Galant 6)

5-speed manual transmission
General parameters
Gearbox type	5-speed transmission type F5M21, F5M22 or F5M31
Volume of transmission oil	See Chapter Settings and ongoing maintenance
Adjustment parameters
Axial clearance of differential box, mm	0.05÷0.17
Differential preload, mm	0.05÷0.10
Satellite engagement play, mm	0.025÷0.150 (both ways)
Axial clearance of primary shaft bearings, mm
Front bearing	0.010÷0.120
Rear bearing	0.00÷0.09
Axial clearance of intermediate gear bearing, mm
All boxes except F5M31	0.010÷0.140
Manual transmission F5M31	0.010÷0.110
Intermediate shaft preload, mm	0.05÷0.10
Secondary shaft preload, mm	0.05÷0.10
Tightening forces of threaded connections N·m
Bolts securing the shift lever to the housing	9÷14
Selector and shift cable guides	9÷14
Speedometer drive coupling mounting bolt	27÷44
Reverse Light Switch Sensor	30÷35
Drain plug	30÷34
Filler plug	30÷35
Bolts for fastening the manual transmission to the engine
Mirage models up to 1992.	43÷55
Mirage models since 1993.	48
Galant models up to 1993.	43÷55
Galant models since 1994.	48
Gearbox mounting bolts
Bolts 12mm	43÷53
Bolts 10mm	30÷35
Bolts 6÷8 mm
Clutch dome mounting bolts	8÷10
Lower tie bolt of manual transmission	30÷35
Bearing Holder Bolt	16÷22
Differential pinion bolt	130÷140
Primary shaft lock nut	140÷160
Intermediate shaft lock nut	140÷160
Lock plate bolt	20÷27
Lower control arm ball joint pin nut	60÷72
Rear cover bolts	15÷22
Reverse gear intermediate gear axle bolt	15÷22
Locking bracket bolt	15÷22
Bolts for fastening the suspension support bracket to the gearbox housing	60÷80 10÷12
Suspension support nuts	48
Suspension support through bolt	69