Removal and installation
− Before you begin removing parts, perform the following operations:
- a) Remove the side door sill trim.
- b) Remove the front side trim.
- c) Remove the lower part of the center pillar trim.
- d) Remove the side door trim.
− The parts are removed in the order of the numbers indicated in the figure "Removing the guide groove and side door seal".
Removal the guide groove and side door seal. 1 - inner side door seal; 2 - side door glass guide groove; 3 - outer seal of the side door opening (remove the central guide of the rear side door glass); 4 - inner seal of the side door glass (remove the side rearview mirror and the side door glass); 5 - side door window molding.
[The material was created based on the website: www.mitsubishiman.ru]
Note: The arrows indicate the locations of the fasteners. Please note that two different types of fasteners are used to secure the elements.
- When removing parts, pay attention to removing the outer seal of the side door opening.
To remove the outer side door seal, use a tool specially made to the dimensions shown in the figure.
− Installation of parts is carried out in the reverse order of removal.
- After completing the installation of the parts, perform the following operations:
- a) Install the side door trim.
- b) Install the lower part of the center pillar trim.
- c) Install the front side trim.
- d) Install the side door sill trim.