Note. Installing a trailer hitch requires special skills and equipment.
Maximum trailer weight with brakes and maximum hitch load
Never exceed the maximum permitted drawbar load specified in the specifications. When towing a trailer at an altitude of more than 1000 m or more above sea level, the weight of the trailer should be reduced by 10% of the total mass of the vehicle with a trailer for every 1000 m above sea level, since the effective engine power decreases due to a decrease in atmospheric pressure.
Technical specification for the installation of the trailer hitch
For correct fastening of the trailer hitch at points A, it is recommended to observe the dimensions indicated in the table below (values are given in mm).
Note. The value of point 7 is given for the curb weight of the vehicle.
Note. The characteristics given in line 7 of the table are valid for an unloaded vehicle. They may vary depending on tire size, optional equipment and suspension condition.
Driving with a trailer
Don't let the clutch slip (on vehicles with manual transmission) and do not exceed the required engine speed when pulling away.
When driving with a trailer, do not exceed 100 mph.
Also, do not exceed the legal maximum speed for driving with a trailer in your area if it is below 100 mph.
To avoid hitting and jerking from the trailer, which can occur when you press the brake pedal too hard, press it lightly at first and then harder.
Shift into a low gear before going downhill to fully utilize the engine braking effect.
The body, brakes, clutch and chassis will be subjected to increased stress when towing a trailer.
An increase in mass, as well as an increase in tire rolling resistance and air resistance, will cause an increase in fuel consumption.