Contents: Remote control unit ⤓ Procedure ⤓
Remote control unit
1. Battery; 2. Latches; 3. Screw; 4. Round gasket; 5. Open
Procedure
1. Remove the screw from the back of the remote control box and open the box.
2. Remove the old battery.
3. Install the new battery with the positive contact facing down.
Use a CR2032 battery.
4. Insert the latches first. Then, being careful not to move the round gasket, assemble the remote control unit.
5. Check the operation of the electronic locking system.
Attention! Buy the battery in a specialized store.
Please note: Your dealer can replace your battery if necessary.
Caution: When the remote control unit is open, keep it away from water, dirt, etc. In addition, try not to touch the precision electronic device.
Caution: If the circular gasket is displaced during assembly, water or dirt may enter the unit, causing it to malfunction.