2. Set the distance from the centers of the fog lights to the screen to 3 m, as shown in the figure.
3. Bring the tire pressure to the nominal value and leave only the driver in the car, or place a load of about 75 kg in his place.
4. Set the engine speed to 2000 rpm and adjust the beam of the front fog lights.
5. Check that the location of the light beam on the screen corresponds to the nominal value.
Nominal dimensions:
- Vertical: 60 mm below horizontal
- Horizontal: Parallel to the direction of vehicle movement.
(The original article is on the website MITSUBISHIMAN.ru)
Note: The horizontal direction is not adjustable. If the deviation of the light beam exceeds the nominal value, check that the mounting position is correct or there are no other mounting defects.
Caution: When adjusting the headlight beam, cover the headlight that you are not adjusting at the moment.